Depiction
The equipment is applicable to produce PC,PP,PE hollow profile board. The products is used widely for building, decorating, advertisement laying, road noise isolation and packing. PP hollow profile board can instead of carton which have feature like light weight, high strengthen, moisture-proof, antisepsis.
Main Parts
| Components | Amount |
| 1. SJ120/33 single screw extruder | 1set |
| 2.Quick screen changing system | 1 set |
| 3.PP2000 middle hollow board former mould | 1 set |
Main technique Parameter
1. SJ120/33 single screw extruder
Screw dia:120mm
Screw L/D:33:1
Motor power: 90kw
2,Quick screen changing system
a) quick screen-changing device
Screen-changing mode: push-and-pull by turns
b) quick screen-changing hydraulic-pressure station
System max. working pressure:P=170kg/cm2
Energy-saving air-charging pressure:P-110kg/cm2
Oil pump exhausting volume:4cm3/rev
Motor power:1.5kw
3.PP2000 middle hollow board former mould
a) middle hollow froming mould head die
Mould head die valid width:1100-1200mm
Thickness regulation scope:2-6mm
b) vacuum calibrating mould
Vacuum calibrating grade kind: two grades
Water circulation control: controlled by five groups
4. YG2000 PP board accessory machine line
a) vacuum calibration table
Upper mould board lift distance:350mm
Lift mode:pneumatic
b) the first puller(total 6 pairs drawing rollers)
Pulling roller clamped sightly mode:pnuematic
Pulling travel roller lift distance:80mm
Pulling max. linear speed:4m/min
Cutting edge mode:cutting by forcely pulling it
Air pressure need: ≥0.5Mpa
c) constant temperature device
Heating mode:electric heating
Max. temperature control: ≤200°C
d) cooling roller support-bracket and film release device
total cooling roller support-bracket length:3000mm
e) the second puller
Pulling roller clamped sightly mode:pnematic
Pulling travel roller lift distance:80mm
Pulling max. linear speed:4m/min
Quantity of separate cutting component:total 3
Separate cutting action:electric control pnematic
Separate mode:forcely separately cutting by pulling knife
Air pressure needed: ≥0.5Mpa
f) tracking cutting
cutting mode:cutting by pulling knife
clamped sightly mode:multi-dot pnuematic press sightly
max.cutting width: 1300mm
Air pressure needed: ≥0.5Mpa
g).conveying table:
converying mode:conveying by fixed speed
conveying speed:5m/min
conveying belt width:2600mm
conveying table total length:6000mm
